Monday 14 October 2013

Untrained forklift driver and poor system of work cause truck to overturn

Midland Steel Reinforcement Supplies Limited of Bexley  has been fined £28,500 (inc. costs) after a forklift truck overturned during a risky and poorly planned operation to move and empty a skip.
The circumstances were:
  • The firm supplies reinforced steel bars (rebar) to the construction industry.
  • On 13 September 2011 the operator of the forklift was told to empty bins at the site, an instruction he understood to include small skips containing offcuts of rebar.
  • The operator of the forklift was untrained and unsupervised.
  • The system and method of work was unsuitable and posed clear risk.
  • A safer method than that used was available to empty the waste steel rebars in the form of tipper skips, which were in use elsewhere at the site.
  • He used a forklift truck to lift and move one of the skips to a larger waste container and balanced it on the edge. 
  • He then retracted the forks of the forklift and used them to tip the skip and empty the contents.
  • He then jumped from the cab and into the waste container in order to attach a sling to the empty skip and the forks of the forklift so that he could pull and lift it back out.
  • He climbed back into the cab and attempted to do so but the forklift overturned, with the lifting column coming to rest on the edge of the container.
  • The fact it didn’t hit the ground created a small gap between the cab and the floor that the operator was able to crawl through.
  • He wasn’t wearing a seatbelt when the forklift overturned – making it all the more remarkable that he avoided harm.

The HSE Inspector  commented:
“The forklift truck should have never have been used to lift and manoeuvre the skip in this way. It was a system and method of work that posed clear risk, and the worker is extremely fortunate to avoid being seriously injured – possibly even killed had the forklift struck and crushed him as it overturned. The onus is on employers like Midland Steel Reinforcement Supplies to ensure operations are properly planned, managed and supervised, and that adequate training, instruction and equipment is provided to at all times to protect workers.”

No comments:

Post a Comment